Does Dynalink WiFi support T-Mobile’s 5G Home Internet?

Yes, Dynalink WiFi can work with T-Mobile 5G Home Internet service. You do not need to change any settings on the T-Mobile Home Internet Gateway. For Dynalink WiFi, use default WAN setting (DHCP). Simply use Ethernet to connect Dynalink WiFi’s WAN port to one of T-Mobile 5G Gateway’s LAN port, then you can start to enjoy T-Mobile’s service with Dynalink WiFi.

For best performance, you can also do the following:

1. Change Dynalink Router WAN MTU to 1420, you can do so from WebGUI > Network > WAN > DHCP.

2. Try both LAN ports on TMO 5G gateway and use the port with better throughput.

3. Disable WIFI on TMO 5G gateway to avoid interference with Dynalink WiFi. However, if you would like to keep both WIFI on, you should use different WiFi channel for both devices. One simple way is to reboot your Dynalink Router, it will scan and select best channel every time after reboot, or you can use WebGUI > Network > WiFi > Radio to manually change WiFi channel on Dynalink Router.